If you are looking to take your shop or business to the next level in TIG welding capability, the digital inverter-based PowerTIG 210 EXT delivers exceptional power and performance at a budget friendly price. In fact, the PowerTIG 210 EXT not only has a long list of competitive features but also unique features that distinguishes it from the competition. You'll find surprisingly comptetive performance when comparing feature to feature against the competition such as memory, pulse and wave forms thanks to the microprocessor from Infineon. When you compare the additional features and the price advantage the welder offers such as the advanced pulse for aluminum welding and advanced stick welding controls such as Hot start intensity and time adjustments, the PowerTIG 210 EXT really stands on it's on. Advanced pulse is a new feature introduced on the digital PowerTIG units which improves top and low end performance on Aluminum. It can be set up to increase penetration on thick aluminum up to 25% over what is traditionally accepted as the maximum limit for the maximum output of the welder. Two "Easy Start Up" modes also add to the units versatility while keeping operation simple. The unit also excels as a stick welder featuring hot start time, hot start intensity and arc force control adjustments, making it a perfect welder for E6010 or E7018 welding. Everything on the AC/DC pulse TIG welder has been carefully designed for maximum life and repairibility down the road with componentized design and IGBT module components from Infineon, making diagnosis and repair, a simple, easy process. One of the important advancements made on the new PowerTIG 210 EXT is the use of Power Factor Correction that allow the unit to be used on power that may not always be as clean and stable as it should be.
If you are looking to take your shop or business to the next level in TIG welding capability, the digital inverter-based PowerTIG 210 EXT delivers exceptional power and performance at a budget friendly price. In fact, the PowerTIG 210 EXT not only has a long list of competitive features but also unique features that distinguishes it from the competition. You'll find surprisingly comptetive performance when comparing feature to feature against the competition such as memory, pulse and wave forms thanks to the microprocessor from Infineon. When you compare the additional features and the price advantage the welder offers such as the advanced pulse for aluminum welding and advanced stick welding controls such as Hot start intensity and time adjustments, the PowerTIG 210 EXT really stands on it's on. Advanced pulse is a new feature introduced on the digital PowerTIG units which improves top and low end performance on Aluminum. It can be set up to increase penetration on thick aluminum up to 25% over what is traditionally accepted as the maximum limit for the maximum output of the welder. Two "Easy Start Up" modes also add to the units versatility while keeping operation simple. The unit also excels as a stick welder featuring hot start time, hot start intensity and arc force control adjustments, making it a perfect welder for E6010 or E7018 welding. Everything on the AC/DC pulse TIG welder has been carefully designed for maximum life and repairibility down the road with componentized design and IGBT module components from Infineon, making diagnosis and repair, a simple, easy process. One of the important advancements made on the new PowerTIG 210 EXT is the use of Power Factor Correction that allow the unit to be used on power that may not always be as clean and stable as it should be.
Features & Benefits
- Digital microprocessor control by Infineon
- Infineon IGBT Power Modules increase reliability and performance
- True low amp operation down to 3 amps DC and 5 amp AC
- 2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation.
- Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave
- HF or Lift Arc capability in AC or DC modes.
- No hidden menus to access or complicated set up routines
- Simplified menu design allows settings to be quickly selected and adjusted
- Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user
- Pulse up to 500Hz in DC, 250 Hz AC
- 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals
- Arc force control, Hot start time, Hot start intensity settings for Stick welding to improve performance
- VRD function to help reduce chance of shock or electrocution in areas where a VRD is required or needed for stick welding
- Built in 240V receptacle for PowerCool 300 water cooler
- Full time fan for maximum duty cycle operation
NOTE: For generator use: Use only generators that are certified as "clean power" by the manufacturer. This means that the unit has <10% total harmonic distortion (THD). For operation on 240V, use a generator that is rated for 7500 surge watts or greater.
Standard Equipment
- 8 metre Gas-cooled SL 26 TIG torch with starter consumables + BONUS 8 metre SR9F flex head TIG torch (limited offer)
- HD Arc Welding Electrode Holder
- HD Work Clamp
- 2 metre mains cable.
- Upgraded NOVA Foot Pedal
- Argon Regulator (Side-Entry)
Optional Equipment
- Water Cooler and Water-cooled torches
- Welding helmet
- Consumable kit
Deluxe Series Torches: WP9, 17, 18, 20, 26 Flex head torch. Available in 4m or 8 metre.
- NEW! 17 series Finger amp Control Torch. 4 metre.
Recommended Areas Of Use
- Automotive
- Field work with generator
- Marine
- Pipeline
- Light fabrication
- Architectural stainless
- Schools and Colleges
- Demanding home user.
Specifications:
| | PowerTIG 210 EXT |
|---|
| IGBT Type | Module IGBT |
|---|
| Inverter Type | Digital/Micro-controlled |
|---|
| Output Type | AC/DC TIG, DC Stick |
|---|
| Voltage/phase | 240V 1 Phase |
|---|
| Max Rated TIG Amps | 210A |
|---|
| Max Rated Stick Amps | 160A |
|---|
| TIG Amps @ Rated Duty Cycle | - 210A/ 18.4V @ 60% Duty Cycle/ 40° C
- 170A/16.8V @ 100% Duty Cycle/ 40° C
|
|---|
| Stick Amps @ Rated Duty Cycle | - 160A @ 60% Duty Cycle
- 100A @ 100% Duty Cycle
|
|---|
| Max Inrush ( I1MAX ) Amps | 32A |
|---|
| Maximum Rated (I1EFF ) Input Amps | 19A |
|---|
| OCV | 70V |
|---|
| TIG Output Range DC | 3A/10.2V – 210A/18.4V |
|---|
| TIG Output Range AC | 5A/10.8V – 210A/18.4V |
|---|
| Stick Ouput Range DC | 20A/20.8V – 160A/26.4V |
|---|
| Stick Hot Start Amps | 0–100% |
|---|
| Stick Function | Adjustable Arc Force Control |
|---|
| Stick Hot Start Type | Adjustable Hot Start |
|---|
| Stick Hot Start Time | 0–2 Seconds |
|---|
| 6010/Cellulose Capable | Limited to 6011 |
|---|
| Minimum Amp DC TIG Start | 5A |
|---|
| Minimum Amp AC TIG Start | 5A |
|---|
| TIG Start Type | HF and Lift Start |
|---|
| Memory | Yes |
|---|
| Start Amp Range | |
|---|
| End Amp Range | |
|---|
| Upslope Time | 0–25 Seconds |
|---|
| Down Slope Time | 0–25 Seconds |
|---|
| Preflow time | 0–25 Seconds |
|---|
| Post Flow Time | 0–50 Seconds |
|---|
| TIG Pulse | Yes |
|---|
| Standard DC Pulse Frequency | .1–500 Hz |
|---|
| Standard AC Pulse Frequency | .1–250Hz (Advanced Square) |
|---|
| AC Advanced Pulse Frequency | .1–10Hz (Soft Square, Triangular, Sine) |
|---|
| Pulse Time On (Duty Cycle) | 5–95% |
|---|
| Pulse Amp Range | 3%–100% |
|---|
| AC Frequency (Hz) | 20–250Hz |
|---|
| AC Balance Range | 5%–90% |
|---|
| AC Wave Forms | - Advanced Square
- Soft Square
- Triangular
- Sine
|
|---|
| Spot Function | No |
|---|
| Gas Purge Function | Yes |
|---|
| Remote Control | 2T/4T (Optional Amptrol torch available) |
|---|
| Foot Pedal | Nova Foot Pedal |
|---|
Product specifications may be changed at any time without notice. We make every effort to ensure the specifications are correct, but are very dependent on Everlast Power Equipment Inc, USA for the details.
