(02) 6581 2338  

Power i-MIG 275P

Actual product may vary from the photo shown.
(incl. GST; credit card payments incur a 2% surcharge)
Freight: $0.00
* Surcharge may apply to some remote areas, please call.



View Brochure
What's Included

Intended for those customers that are interested in a truly versatile MIG or for those interested only in MIG welding Aluminium, the Power i-MIG 275P incorporates many advanced features and capabilities that far exceed most MIG welders in it's class. Beginning with a serious 50% duty cycle at 275 amps via dual fan cooling, this unit packs an industrial level punch without being overly large or dependent upon an intergrated undercarriage to move it around. The digitally controlled IGBT component design delivers a stable, low spatter arc with the ability to weld with wire diamters from .023" to .045" with the standard supplied drive rolls. Added to the same MIG features of Synergic and manual welding modes that you will find on the Power i-MIG 275S, the Power i-MIG 275P features an additional pulse MIG mode. This single pulse mode is fully adjustable, with adjustments for pulse voltage, pulse time-on and pulse frequency and can be used to weld metals quickly and out of position without overheating them. If you are new to the idea of MIG pulse, pulse is typically used in areas where the Axial spray process is desired, but due to the heat and inabilty to weld out of position it is prohibited. A single-pulse MIG varies the voltage of the unit between two preset voltage levels. The other pulse controls control the duration and frequency of the pulse and are adjusted so that the MIG arc transfer transitions to spray, but drops out of spray range and settles to a globular transfer range long enough to cool the puddle, but not transfer any metal. This pulse mode is typically used for welding on aluminium or stainless where heat issues are problems with traditional spray arc process. In addition to the pulse mode, the Power i-MIG 275P the unit supports both spool gun and push-pull gun operation for both the hobbyist and the industrial level professional interested in using it for Aluminium welding. Besides the standard manual mode, with the push-pull or spool gun connected, the user has the choice of pulse and for synergic operation. For ease of set-up with multiple users or applications, the unit is also able to store up to 9 different programs. Adjustable burn back, automatic pre/post gas flow, and inductance control also are included so that the user can completely customize and fine tune the MIG's performance. In addition to the already excellent list of MIG features and performance, the Power i-MIG 275P also has a stick welding mode, which includes a E6010/Cellulose mode, hot star adjustments and arc force control.