Power and versatility top the list of features of the Power i-MIG 200. The IGBT inverter design of the i-MIG welder reduces the weight and footprint of the unit making it truly portable. The dual voltage design allows the unit to be used about anywhere a receptacle is present. This unit packs more features than any MIG welder in its class. Dual digital displays feature both volt and amp readouts allowing the operator to make precise and repeatable adjustments to the parameters. The stick function adds an extra dimension of versatility and performance when a MIG welder isn't needed. The Arc force control controls manages the arc characteristics in both MIG and Stick modes. In MIG mode, it controls current rise time, affecting puddle fluidity, bead contour, and penetration. In stick mode the arc force control behaves as a DIG control function and improves arc performance in short arc situations.
Power and versatility top the list of features of the Power i-MIG 200. The IGBT inverter design of the i-MIG welder reduces the weight and footprint of the unit making it truly portable. The dual voltage design allows the unit to be used about anywhere a receptacle is present. This unit packs more features than any MIG welder in its class. Dual digital displays feature both volt and amp readouts allowing the operator to make precise and repeatable adjustments to the parameters. The stick function adds an extra dimension of versatility and performance when a MIG welder isn't needed. The Arc force control controls manages the arc characteristics in both MIG and Stick modes. In MIG mode, it controls current rise time, affecting puddle fluidity, bead contour, and penetration. In stick mode the arc force control behaves as a DIG control function and improves arc performance in short arc situations.
Features & Benefits:
- IGBT Inverter design offers stable, low spatter arc performance
- Arc force control (Inductance) adjusts arc characteristics in both MIG and Stick modes
- Capable of SMAW (Stick) welding when MIG conditions aren't ideal
- Good duty cycle, higher than most competitor's ratings
- Series 15 MIG designed with comfort in mind (Binzel/Trafimet compatable)
- Eurostyle quick coupler allows easy aftermarket changeover to other MIG guns
- Weld aluminium with optional Teflon liner
- Heavy duty cast aluminum wire feed assembly with positive gear driven rollers
- Flux core capable with special order drive rolls
- Over Current and duty cycle features both warning light and weld interrupt
- Truly portable "suitcase" size
- Suitable for use with 5000 W "clean power" generators
Standard Equipment
- Argon/CO2 Regulator
- Euro style quick connector
- Binzel MIG gun and cable
- Work clamp with cable
- Spare consumable starter kit
Optional Equipment
- Welding cart
- Consumable kit
- Welding helmet
- Miller compatible spool gun with 7.5m cable
Recommended Areas Of Use
- Welding Repair
- Automotive/Muffler shops
- Motorsports
- Construction
- Fabrication
- HVAC
- Factory maintenance
Specifications:
Mig Welder | Power I-MIG 200 |
Inverter Type | Infineon IGBT |
Processes | GMAW/ SMAW |
Input Voltage/Phase | 240V 1phase |
Rated Output Amps @ Duty Cycle |
MIG
200A/24V@ 35%
160A/22V @60%
130A/20.5V @100%
Stick
160A/26.4V@ 35%
130A/25,2V @60%
100A/24V @100% |
Rated Max Volts | 24 Volts @200 amps |
Roll Size | 5kg |
Standard Wire Diameter | 0.6–0.8mm |
Spool Gun Ready | No |
Recommended Maximum Metal Thickness single pass | — |
Typical Use | Hobbyists, Automotive, HVAC, General Repair, Fabrication |
Over Current Warning | Yes |
Open Circuit Voltage | 60V |
Max Start Input Amps | 34A @ 240V |
Max Running Amps | 20A @ 240V |
Spool Gun Compatible | — |
Arc Force Control (Dig) | Yes |
SMAW(Stick) Feature Constant Voltage | — |
Pulse Feature | — |
Wire Roll Size | — |
Voltage | 240 V 1 Ph |
Operating Voltage @ Maximum Amperage | 25 Volts @ 215 amps. |
Duty Cycle @ Rated Amps |
MIG
200A/24V@ 35%
160A/22V @60%
130A/20.5V @100%
Stick
160A/26.4V@ 35%
130A/25.2V @60%
100A/24V @100% |
Current Output Range | 30–200A (MIG/MAG)
10–160A (MMA) |
Shipping Weight | 30kg |
Machine Weight | 22kg |
Product specifications may be changed at any time without notice. We make every effort to ensure the specifications are correct, but are very dependent on Everlast Power Equipment Inc, USA for the details.Product Notes:
The optional spool gun wire speed is controlled at the panel. The switch on the spool gun is inoperative on this model.
Minimum/Maximum:
- Weld up to a maximum of 5/16" single pass weld*
- Weld up to a maximum of 1/2" multiple pass weld
- Weld a minimum of 24 gauge
* Single pass welds greater than 1/4" are not generally recommended as a sound welding technique.