Everlast TIG Welders

• Dependable Fairchild IGBT inverter
• New heavy duty internal design
• Commercial 35% Duty Cycle at 140A
• DC Stick/Lift TIG functions
• Auto-adaptive Hot Start
• Auto-regulated Arc Force control
• Stepless adjustment
• Impact resistant carry case

Input:

Output:

• Dependable IGBT inverter
• Analog style panel, digital control
• Commercial, 35% Duty Cycle at 200 amps
• DC TIG/DC Stick functions
• HF or Lift TIG Start
• Pulse up to 250Hz
• Adjustable Stick Arc Force
• Down to 5 amp start/operation
• 120V/240V operation
• Click "More Details" for Pipe Welder Special!

Input:

Output:

• All-in-one portability
• Compact, yet powerful TIG welding/Plasma cutting features
• Easy to use controls with simple selector switch for process changeover
• Quick change out of torches for easy change from TIG to plasma back to TIG
• Low power consumption due to inverter design
• High duty cycle of 60% at rated amperages for TIG/Stick/Plasma
• Front air pressure gauge for easy verification of air pressure
• Over Current indicator warns when duty cycle has been exceeded
• Clean and smooth plasma cuts on virtually any metal
• Weld almost any metal (PowerUltra is DC output only, not suitable for Aluminium)
• Exceptional arc stability for TIG/Stick functions

Input:

Output:

• Compact digitally controlled IGBT inverter
• Smooth, stable arc in AC and DC modes
• Simplified pre-set pulse mode with 1 or 50 Hz selection
• 5 Amp DC/20 Amp AC start
• Automatic Pre-flow
• Adjustable Down-slope control
• Adjustable Post flow time control
• Advanced Square wave output
• 2T/4T operation for torch switch control
• HF or Lift TIG start
• 150 Amp Stick function
• Adjustable AC frequency 20&ndahs;250Hz
• Adjustable AC balance control 10–90%, same as 250EX

Input:

Output:

• Digital IGBT Inverter construction
• MIG/DC TIG/Stick/Spool Gun
• Synergic MIG function
• 40% Duty Cycle @ 210 Amps MIG/TIG
• Adjustable MIG/Stick Arc Force
• Save up to 9 programs
• HF and Lift Start for TIG
• .023"-.035" Wire diameter (Std.)
• 15 Series Euro fast connect MIG gun
• 4"-8" spool

Input:

Output:

• Stable, smooth arc characteristics with good puddle wet in.
• Portable and lightweight with industrial capability.
• Adjustable weld parameters for 2t/4t operation.
• Pulse function increases weld quality and reduces overall heat input to help control burn through on thin metals.
• Easy to connect DINSE 35/70 style torch connectors on torch and quick connect gas line allows quick setup.
• Digital readout for accurate setting of amperage while in torch switch mode.
• Colour coded controls are easy to find and understand.
• Ergonomic styled torch and accessories.
• Special 240V outlet designed for operation with the optional Everlast WC 300 water cooler.
• Includes post flow and down slope control for additional parameter selection ability.

Input:

Output:

• NEW! Digitally Controlled IGBT Inverter
• Analog style controls for easy setup
• Ideal for portable repair, shop, or farm use
• 200A TIG/ 160A Stick/ 50A Plasma
• Weld and cut in one package
• 60% Duty Cycle at max TIG Amps
• AC/DC output to weld any metal
• Fully adjustable pulse .5-250Hz
• Cut up to 3/4"

Input:

Output:

• Digital IGBT Inverter construction
• MIG/DC TIG/Stick/Spool Gun
• Pulse MIG/Syn MIG/Pulse TIG function
• 35% Duty Cycle @ 250 Amps
• Adjustable MIG/Stick Arc Force
• Save up to 9 programs
• HF and Lift Start for TIG
• .75mm – 1.15mm Wire diameter
• 25 Series Euro fast connect MIG gun
• 200mm spool (4.5kg to 5.5kg)

Input:

Output:

• Rugged Infineon IGBT Module Inverter
• Digital Infineon Microprocessor
• Industrial 60% Duty Cycle at 210 Amps
• AC/DC TIG/ DC Stick functions
• Solid State HF or Lift TIG start
• Pulse up to 500 Hz DC; 250 Hz AC
• Advanced Square, Soft Square, Triangular, and Sine wave forms
• Adjustable Arc force and Hot Start
• 9 programmable channels to save favorite settings
• Advanced AC Pulse

Input:

Output:

The Everlast PowerPro 256Si brings maximum power and performance to the table with its newly redesigned IGBT inverter design by featuring digital control. This increases reliability and accuracy. It's ideally suited for repairs and maintenance chores when space and portability on the job site or repair truck are real concerns. The welder features up to 250 amps of AC/DC TIG welding power, and a full 200 amps of stick welding power to handle almost any welding project or task. The plasma cutter also supplies up to 60 amps of power to cut or trim up any metal to complete the task and features the longer life PT/iPT 60 torch. The PowerPro series of welders from Everlast are designed for utility use and offer a good value for both hobbyists and professionals who need portable, all-in-one welding and cutting capability.

Input:

Output:

• Stable, smooth arc characteristics with good puddle wet in.
• Portable and lightweight with industrial capability.
• Adjustable weld parameters for 2t/4t operation.
• Pulse function increases weld quality while reducing overall heat input.
• Easy to connect torch and accessories allow quick setup.
• Connect to clean power generator for "go anywhere" capabilities.
• Digital readout for accurate setting of amperage controls.
• Color coded controls are easy to find and understand.
• Ergonomic styled torch and accessories.

Input:

Output:

• Rugged Digital IGBT Inverter
• Industrial 60% Duty Cycle at 250 Amps
• AC/DC TIG/ DC Stick functions
• Solid State HF or Lift TIG start
• Pulse up to 500 Hz DC; 250 Hz AC
• Advanced Square, Soft Square, Triangular, and Sine wave forms
• Adjustable Stick Arc force and Hot Start Control
• Advanced AC Pulse

Input:

Output:

• Digital IGBT Inverter construction
• MIG/AC/DC TIG/Stick/Spool Gun
• MIG/Syn MIG/Pulse TIG function
• 40% Duty Cycle @ 200A MIG/TIG, 200A Stick
• Adjustable MIG/Stick Arc Force
• Save up to 9 programs
• HF and Lift Start for TIG
• 0.6mm–1.2mm Wire diameter
• 15 Series Euro fast connect MIG gun
• 8" spool (10 to 12 lbs)

Input:

Output:

• Digital microprocessor control
• IGBT Power Modules increase reliability and performance
• Operation down to 5 Amps DC and 10 Amps AC
• 2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation.
• Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave
• Gapless, Solid-State High Frequency design reduces maintenance issues and improves start reliability
• No hidden menus to access or complicated set up routines
• Simplified menu design allows settings to be quickly selected and adjusted
• Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user
• Pulse up to 500Hz in DC, 250 Hz AC
• 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals
• Arc force control, Hot start time, Hot start intensity settings for Stick welding to improve performance
• VRD function to help reduce chance of shock or electrocution in areas where a VRD is required or needed for stick welding
• 415V 3 phase input capability

Input:

Output: